OptiComm Required Speed Troubleshooting

This article will explain all the troubleshooting that must be completed for speed issues with an OptiComm fibre internet service. In the event that you wish to lodge a speed fault for your service, OptiComm has a mandatory requirement for these test results.

We recognise that these tests may be time consuming and complicated for some users, but we must adhere to OptiComm's policy. If you get stuck, please call our friendly Support Team on 13 22 58 and we'll be happy to help.

Select one of the links below to jump to a query:

Before you begin testing, please read through the following points as OptiComm has strict requirements.

  1. Tests must be performed on two different computers that are plugged directly into the LAN1 port of the OptiComm Network Terminating Unit (NTU) with an Ethernet cable.
     
  2. You'll need to record the MAC address of each computer you use for testing. Learn how.
     
  3. While testing, your computers must be operating in "Safe Mode with Networking". Instructions on how to do this are below:
    Safe Mode for Windows 10
    Safe Mode for Windows 8
    Safe Mode for previous versions of Windows
    Safe Mode for MAC OSX
     
  4. Testing needs to be conducted over multiple days. A member of our Support Team can advise how many days of testing is necessary for the nature of your fault.
     
  5. Each test must be performed three times each day: once in the Morning, the Afternoon and the Evening.
    Please note:  If you miss one of these tests, you cannot perform the test twice at the next interval to make up for it. This will cause OptiComm to reject the fault.
     
  6. Testing must be completed within 72 hours before submitting the fault. OptiComm will reject faults where the most recent set of test results are older than 72 hours.

 

  1. Open your browser and go to https://www.iinet.net.au/internet-products/broadband/speed-test/

  2. Click Test your internet speed. In the popup window, click GO and let the test run.
     
  3. Once the test has completed, click COPY LINK to copy your result link.
     
  4. In a text editing program such as Microsoft Word or Notepad, record the following information for your test.

    Date: (Date test was performed)
    Time: (Time test was performed)
    Result link: (Paste your result link from the speed test)
    MAC Address: (MAC Address of computer used for test)
     

  5. Save these results as a text file on your computer so that you can email them altogether at the end of testing.

 

There are two separate methods to test TCP Throughtput, and OptiComm requires both to be performed at each testing.

Please note that the following web browsers are suitable for these tests because they display the file transfer rate while a file is downloading:

  • Google Chrome
  • Mozilla Firefox
  • Microsoft Internet Explorer

Microsoft Edge and Safari 9 (default browser for Mac OSX El Capitan) do not show the transfer rate while a file is downloading, so they are not suitable for these tests. This feature may exist in earlier versions of Safari, but otherwise we recommend a browser which is available to all operating systems such as Google Chrome.

  1. This test involves running mulitple downloads simultaneously.
     
  2. Open your browser and go to http://ftp.iinet.net.au/test500MB.dat
     
  3. You will be asked to open or save the file "test500mb.dat". Select Save (we recommend saving to Desktop so the files can be cleaned up easily afterwards).
     
  4. Click http://ftp.iinet.net.au/test500MB.dat and select Save 2 more times so you have at least 3 of these files downloading at the same time.
     
  5. While the files are downloading, take note of the “File Transfer Rate” of each file in the download window.
     

     
  6. In a text editing program such as Microsoft Word or Notepad, record the following details:

    File 1 Transfer Rate: (e.g. 5.0 MB/sec)
    File 2 Transfer Rate: (e.g. 5.0 MB/sec)
    File 3 Transfer Rate: (e.g. 5.0 MB/sec)
    Total File Transfer Rate: (Add all 3 transfer rates together e.g. 15.0 MB/sec)
    Date: (Date test was performed)
    Time: (Time test was performed)
    MAC Address: (MAC Address of computer used for test)
     

  7. Save these results as a text file on your computer so that you can email them altogether at the end of testing.
  1. This test involves a single download.
     
  2. Open your browser and go to http://speedcheck.cdn.on.net/1000meg.test
     
  3. You will be asked to open or save the file "1000meg.test". Select Save (we recommend saving to Desktop so the files can be cleaned up easily afterwards).
     
  4. While the file is downloading, take note of the “File Transfer Rate” in the download window.
     
  5. In a text editing program such as Microsoft Word or Notepad, record the following details:

    File Transfer Rate: (e.g. 15.0 MB/sec)
    Date: (Date test was performed)
    Time: (Time test was performed)
    MAC Address: (MAC Address of computer used for test)
     

  6. Save these results as a text file on your computer so that you can email them altogether at the end of testing.

 

  1. On a Windows PC, open the Start menu. Select All Programs > Accessories > Command Prompt. Alternatively, Search for "cmd".
     
  2. Type the following ping commands into the Command Prompt. After each command, press Enter to action it:

    ping -n 100 -w 3000 ftp.iinet.net.au

    ping -n 100 -w 3000 speedcheck.cdn.on.net

    ping -n 100 -w 3000 speedtest.net
     

  3. After completing all three pings, click the CMD icon in the top left of the window and select Edit from the drop-down menu.
     
  4. Click Select All to highlight the text in the Command Prompt, and then hit the Enter key on your keyboard to copy the text.
     

     
  5. Paste (CTRL+V) the text into a Word document (or similar) and save it as a text file on your Desktop. We recommend that you Rename these files and add the Date and Time to the file name so you can easily recognise them when it's time to send your test results to us.

    e.g. "pingftp.txt" could be renamed to "pingftp10AUG_Morning.txt"
     

  1. Click Go in the top menu bar and select Utilities. In the top right-hand corner of the Utilities window, type Network Utility in the search bar.
     
  2. Open Network Utility, and then select Ping.
     
  3. For all tests, select "Send only (blank) pings", and enter "100" as the number of pings.
     
  4. In a text editing program such as Microsoft Word or Notepad, record the results from pinging the following 3 network addresses:

    ftp.iinet.net.au
    speedtest.net
    speedcheck.cdn.on.net

     

  5. Save these results as a text file on your computer so that you can email them altogether at the end of testing.

 

  1. On a Windows PC, open the Start menu. Select All Programs > Accessories > Command Prompt. Alternatively, Search for "cmd".
     
  2. Enter the following trace route commands into the Command Prompt. After each command, press Enter to action it (please note that your computer may hang for a few moments when actioning each traceroute - this is normal):

    tracert ftp.iinet.net.au
    tracert speedcheck.cdn.on.net
    tracert speedtest.net

    tracert msn.com
    tracert hotmail.com

     

  3. Click the CMD icon in the top left of the window and select Edit from the drop-down menu.
     
  4. Click Select All to highlight the text in the Command Prompt, and then hit the Enter key on your keyboard to copy the text.
     

     
  5. Paste (CTRL+V) the text into a Word document or similar and save it as a text file on your desktop. We recommend that you Rename these files and add the Date and Time to the file name so you can easily recognise them when it's time to send your test results to us.

    e.g. "ftptrace.txt" could be renamed to "ftptrace10AUG_Morning.txt"
     

  1. Click Go in the top menu bar and select Utilities. In the top right-hand corner of the Utilities window, type Network Utility in the search bar.
     
  2. Open Network Utility, and then select Traceroute.
     
  3. In a text editing program such as Microsoft Word or Notepad, record the results from tracerouting the following 3 network addresses:

    ftp.iinet.net.au
    speedtest.net
    speedcheck.cdn.on.net

     
  4. Save these results as a text file on your computer so that you can email them altogether at the end of testing.

 

  1. Once you have completed all of the required tests, please email support@iinet.net.au with your test results attached.
     
  2. Once your test results have been received, we can investigate further.
     
  3. We'll always contact you in the event that we need further information, or to lodge a fault with OptiComm.

 

Was this article helpful?

YesNo