This article will help you troubleshoot any issues with your iiNet Dialup service.
Please note that in December 2015 we retired all old dialup numbers across the iiNet Group - to dial up, you'll need to dial 0198 333 955.
Select one of the links below to jump to a query:
- Protecting your modem
- Your modem disconnects unexpectedly, times out or connects at a very slow speed
- Stabilising an unstable connection
- Modem reports that there is no dial tone
- You cannot use your PABX or Commander system to connect
- Your modem connection shows some huge amount like 57600 or 115200. What's happening?
- Your modem hangs up every 5-20 minutes
- The modem is connected but I can't view websites
Protecting your modem
Your dialup modem is one of the most delicate parts of your computer - any electrical surge can cause it to malfunction or not work at all! To protect your modem, you should invest in a surge protector. It can protect the modem through both its phone line and its power supply, and you can also plug your computer into it as well. Electronics and computer stores usually carry them.
If there's an electrical storm, it's good practice to unhook the telephone line from your modem and unplug the computer at the wall.
Your modem disconnects unexpectedly, times out or connects at a very slow speed
You may have call waiting turned on, and that little "beep beep" you normally hear when another call is coming through is throwing the modem off. To turn it off you need to dial #43# before connecting; to re-enable it, dial *43#.
Telephone double adaptors and very long extension cables can cause dropouts. Phone cables come in different qualities. If you are getting poor performance from the modem and a lot of dropouts, good quality phone cable is worth investing in. If possible, see if it makes a difference plugging the modem directly into the phone line with no other devices attached anywhere in the house.
Telephony between a digital mobile phone (familiar to some as the "dit-diddit" noise that comes out of any nearby speaker when their mobile is doing something) and a GSM cellular base station can cause severe data transmission loss that can terminate a modem call.
If you have a burglar alarm which automatically dials and transmits data, this will affect your line quality. Ensure your modem communications are not carried out during the alarms communication cycle.
Anything electric can cause interference with your modem, especially appliances which give off lots of radio interference. Check what is turned on that is in close proximity of the phone line/modem. Things you might want to watch out for are
- Televisions and radios
- Refrigerators (especially when it cycles on and off)
- Washing machines going in to a spin cycle
If you get a better connection when those things are off or on another power circuit, try a surge protector. Electronics and computer stores usually carry them.
Poor waterproofing on the phone lines is also a problem for modems, and it's likely that this is the case if the problem gets worse when it is raining or if it's recently been raining. You may be able to hear interference on the line as crackle and background hiss.
Loose or degraded telephone line wiring can also create noise on the line, leading to disconnections. The copper wire which runs around your house, down several streets and into your local exchange is made up of segments which vary in age, gauge and quality. If it's in a poor state, nothing else you do at your house will make any difference.
Telstra's telephone exchange and the distance to it can make a difference in your connection performance. Some exchanges might have some good lines and some bad lines so it is a lottery whether you get a good one. Each call you make may be different.
Stabilising an unstable connection
Modern 56K modems push the phone line to the limit, and need to retrain (change their transmission speed) to keep up with the line conditions. It takes a few seconds to do this retraining, and these are the pauses you may experience.
Sometimes, when the retraining occurs, it can't successfully negotiate a new speed and will hang up.
This problem becomes more pronounced the faster the modem runs; if you are experiencing difficulties it may be wise to "lock" your modem at a certain speed. First try intermediate speeds such as 44kbps, 40kbps etc. Failing all else, turn off K56Flex/V90 in your modem all together and connect with 33.6kbps.
Check your modem manual for instructions on how to do this, or try strings from the following:
For 56k flex modems try:
- Forcing 44kbps: +ms=56,1,1200,44000
- Forcing 42kbps: +ms=56,1,1200,42000
- Forcing 40kbps: +ms=56,1,1200,40000
For 56k V90 modems try:
- Forcing 44kbps: +ms=12,1,1200,44000
- Forcing 42kbps: +ms=12,1,1200,42667
- Forcing 38kbps: +ms=12,1,1200,38000
If your modem has problems accepting the above strings, try:
- Forcing 44kbps: +ms=v90,1,1200,44000
- Forcing 42kbps: +ms=v90,1,1200,42667
- Forcing 38kbps: +ms=v90,1,1200,38000
And so forth, down to:
- Forcing 33.6kbps: +ms=11,1,1200,33600
If your modem has problems accepting the above string, try:
- Forcing 33.6kbps: +ms=v34,1,1200,33600
To set a string under Windows once you have one, see Adding a modem string on Windows. If none of the strings above work with your modem, please refer to your modem's manual.
Mac OS X users can only set strings by use of specialised programs (recommended) or by altering the start-up sequence of Mac OS X. However, it's possible to slow down the speed of the modem without a special program by doing the following:
- Go to the Apple icon in the top left corner, then select "System Preferences"
- Double-click the "Network" icon
- Go to the "Modems" tab and select the V.34 version of the modem you're currently using from the dropdown menu
- Click "Apply Now" to apply the settings
Modem reports that there is no dial tone
- Make sure that the telephone cable is plugged into the correct modem socket (usually "Line").
- Test the line to make sure that there is a dial-tone by plugging a telephone into the same socket and trying to make a call from it.
- If you have Telstra MessageBank, you will hear a different beeping dial-tone. Your modem will not recognise it as a dial tone and you will not be able to dial out.
You can change settings on your computer to ignore dial-tone and dial regardless. In Windows 95/98 untick the option "wait for dial tone before dialing" in your modem properties. In Mac OS X tick "Ignore the dial tone" in your dialler or modem properties. You can also try adding X3 to your modem initialisation string.
You cannot use your PABX or Commander system to connect
Telstra does not recommend such systems for modem transmissions and recommend installing a specific data line outside of your phone system for modem and fax.
In a pinch, you can try dialling the line out number like "0" or "9" before the phone number in your dialup settings, but your connection will not be as good as through a dedicated line.
Your modem connection shows some huge amount like 57600 or 115200. What's happening?
Your modem has been set up to show the port speed, which can be changed in modem properties on your system. It is reporting the speed between your modem and your computer instead of the speed between your modem and the ISP. To show the actual connection speed add w2 to your initialisation string.
Your modem hangs up every 5-20 minutes
This is common when you have a fax machine or a telephone plugged into the same phone line as the modem. Some older telephones draw electrical current from the phone line every 5 to 20 minutes. This is enough to interrupt the modem's carrier signal and make it drop the connection in confusion.
To solve this, you can:
- Unplug the phone when you use your modem
- Buy a newer phone
Telstra also recommends that a "Mode 3" socket is installed for use with the modem, if any other equipment is in parallel with it. This will isolate the other equipment on the line whilst the modem is in use.
The modem is connected but I can't view websites
See Browsing Issues.