This article will answer some questions about iiNet ULTRA Broadband FTTB.
Fibre to the Building is an internet technology that has fibre optic cable leading to the building's Main Distribution Frame (MDF), typically in the basement or in a locked telecommunications cabinet. From there, the MDF connects to the wall socket in your unit via the building's internal copper cabling.
Select one of the links below to jump to a query:
The iiNet ULTRA Broadband FTTB network is available in select buildings nationwide. The easiest way to confirm availability is to check your address on our website.
To get your broadband up and running, you'll need the following:
Additionally, some premises may require a Network Termination Unit (NTU). If this is the case, we’ll supply this to you without charge. The NTU remains the property of iiNet and should not be removed from a premises once installed.
Our iiNet ULTRA Broadband FTTB plan includes an FTTB Phone (VoIP) service. This technology lets you make and receive phone calls through your broadband connection. It works just like a normal phone, except you save money with lower call rates and included features. To use FTTB Phone, just connect a handset to your FTTB modem.
Typically, FTTB connections are completed within 10 business days although in some cases connection may take up to 20 business days - this varies depending on whether or not you've had FTTB installed at your address previously as well as FTTB installer availability.
What happens when FTTB is installed?
If an FTTB installer is required to visit your premises, we'll be in touch to book a suitable appointment with you. An installation is typically not required if FTTB has been previously connected at your address.
You may prefer to/already have internal network cabling installed at your address for your internet, especially if WiFi doesn't cover your house from end to end or you want to be sure you're always getting the maximum speed possible when transferring large amounts of data between devices in your home.
An FTTB installation does not include additional home network wiring beyond the installation of the Network Boundary Point (your side of the building’s Main Distribution Frame).
By upgrading to FTTB your existing smart wiring setup may need to be re-wired to work with FTTB, depending on the type of FTTB installation your premises requires. You'll need to hire a registered cabler if you'd like to have any additional home network wiring installed or to re-wire your existing cabling.
Many types of devices that are normally connected to phone lines (such as medic alarms, back to base alarms, EFTPOS machines, fax machines and more) can work over the FTTB network, however please contact the service provider to make sure - you may need to order a specific type of phone service or move to a data-based solution.
Please note that iiNet does not offer a Priority Assistance service. If you have Priority Assistance or believe you may be eligible, please consider this before lodging your application.