Are you a customer? We can make sure you get help that's relevant to your services if you confirm some details about your account. You can change this selection at any time.

Help us show you the right stuff.

Please confirm what your invoice or self-help system looks like so we can display tailored information.

What does your iiNet invoice look like?

What does your iiNet self-help system look like? (Not sure? Try logging in here).

iiNet Broadband Settings List

Setup guides for iiNet modems are available here.

You can check which type of broadband you have by checking your address on our website.

Please note: If you use a third party modem, your included phone service (and any calls) will not be available.

If you encounter a setting that isn't listed here (e.g. MTU) in your modem's Setup Wizard/Quick Setup, it should be fine to leave it as the default.

Select one of the links below to jump to a query:

Internet Service Provider (ISP): Other (Do not select "iiNet")
Mode/Modulation:
WAN
Connection Type/Mode/WAN Type:

PPPoE

VLAN*: ON or Enabled (or you may need to set the VLAN networking standard, 802.1q)
VLAN Tagging*: ON or Enabled
VLAN ID*: 2
VLAN 802.1p/VLAN Priority*: 0 (or set VLAN Priority to Disable)
Username: Enter your full username here e.g. example@iinet.net.au (you'll find this on emails from us regarding your NBN order)
Password: Enter your password (Forgotten password? Please use our password recovery tool.)
DNS: 203.0.178.191 or 203.215.29.191

*NBN FTTP only: If your service was connected prior to 30 May 2019, please turn VLAN settings OFF.

 

Please note:

  • Not all modems support VDSL2 or VLAN. Please check the manufacturer's website if you're not sure.
  • When enabling IPTV/VLAN in TP-Link modems, "Mode" must be set to "Custom". The "NBN Australia" mode will not work.
  • When setting up a D-Link modem, you'll need to go to Settings > Internet > PTM and set Interface to "PTM-1". Then in Settings > Internet > IPv4, set PVC to "PTM-1" and VLAN ID to 2.
Internet Service Provider (ISP): Other (Do not select "iiNet")
DSL Standard/Mode/Modulation:
VDSL2
Connection Type/Mode/WAN Type: PPPoE
VDSL Profile: 17a Multi Mode
VDSL Connection Type: PTM
VLAN: ON or Enabled (or you may need to set the VLAN networking standard, 802.1q)
VLAN/802.1q Tagging: ON or Enabled
VLAN ID: 2
VLAN 802.1p/VLAN Priority: 0 (or set VLAN Priority to Disable)
Username: Enter your full username e.g. example@iinet.net.au (you'll find this on emails from us regarding your NBN order)
Password: Enter your password (Forgotten password? Please use our password recovery tool.)
G.INP: Enabled
G.Vector: Enabled
DNS: 203.0.178.191 or 203.215.29.191

 

Mode/Modulation:
WAN
Connection Type/Mode/WAN Type:

PPPoE

Username: Enter your full username here e.g. example@iinet.net.au (you'll find this on emails from us regarding your NBN order)
Password: Enter your password (Forgotten password? Please use our password recovery tool.)
DNS: 203.0.178.191 or 203.215.29.191

 

Please note:

  • Not all modems support VDSL2 or VLAN. Please check the technical specifications or the manufacturer's website if you're not sure.
Internet Service Provider (ISP): Other (Do not select "iiNet")
DSL Standard/Mode/Modulation:
VDSL2
Connection Type/Mode/WAN Type: PPPoE
VDSL Profile: 17a Multi Mode
VDSL Connection Type: PTM
VLAN: Enabled/on (or you may need to set the VLAN networking standard, 802.1q)
VLAN ID: 2
VLAN 802.1p/VLAN Priority: 0 (or set VLAN Priority to Disable)
Username: N/A
Password: N/A
G.INP: Enabled
G.Vector: Enabled
DNS: 203.0.178.191 or 203.215.29.191