Are you a customer? We can make sure you get help that's relevant to your services if you confirm some details about your account. You can change this selection at any time.

Help us show you the right stuff.

Please confirm what your invoice or self-help system looks like so we can display tailored information.

What does your iiNet invoice look like?

What does your iiNet self-help system look like? (Not sure? Try logging in here).

iiNet Broadband Settings List

Setup guides for iiNet modems are available here.

You can check which type of broadband you have by checking your address on our website.

If you encounter a setting that isn't listed here (e.g. MTU) in your modem's Setup Wizard/Quick Setup then it should be fine to leave it as the default.

Select one of the links below to jump to a query:

DSL Standard/Mode/Modulation:
Auto, ADSL or ADSL2+. Select G.DMT if safe mode is desired.
Connection Type/Mode/WAN Type: PPPoE
Multiplexing/Encapsulation: LLC
Authentication type: PAP
Username: Enter your full username here e.g. example@iinet.net.au
example2@westnet.com.au
example3@adam.com.au
Password: Enter your password (Forgotten password? Please try our password recovery tool.)
VPI: 8
VCI: 35
DNS: 203.0.178.191 or 203.215.29.191

 

These instructions also apply to non-NBN™ Fibre to the Home (FTTH) connections such as OptiComm or RedTrain.

Please note: If you use a third party modem, your included phone service (and any calls) will not be available.

Internet Service Provider (ISP): Other (Do not select "iiNet")
Mode/Modulation:
WAN
Connection Type/Mode/WAN Type:

IPoE or Dynamic IP address

Note: Some fibre services including Internode services, South Brisbane Fibre and select locations will need to use PPPoE. If you're not sure which setting you need, please call us on 13 22 58 and we can check our records.

Username (required if using PPPoE): Enter your full username here e.g. example@iinet.net.au
example2@westnet.com.au
example3@adam.com.au
Password (required if using PPPoE): Enter your password (Forgotten password? Please try our password recovery tool.)
DNS: 203.0.178.191 or 203.215.29.191

 

Note that not all modems support VDSL2. Please check the technical specifications or the manufacturer's website if you're not sure.

Internet Service Provider (ISP): Other (Do not select "iiNet")
DSL Standard/Mode/Modulation:
VDSL2
Connection Type/Mode/WAN Type: IPoE or Dynamic IP address
VDSL Profile: 17a Multi Mode
Username: N/A
Password: N/A
G.INP: Enabled
G.Vector: Enabled
DNS: 203.0.178.191 or 203.215.29.191

 

All iiNet NBN™ HFC and FTTC modems supplied by us will auto-configure with all the required settings for your NBN™ broadband and phone services.

If you use a third party modem, your NBN™ phone service (and any calls) will not be available.

Internet Service Provider (ISP): Other (Do not select "iiNet")
DSL Standard/Mode/Modulation:
Ethernet/WAN
Connection Type/Mode/WAN Type: PPPoE
VLAN: Enabled/on (or you may need to set the VLAN networking standard, 802.1q)
VLAN ID: 2
Username: Enter your full username here e.g. example@iinet.net.au
Password: Enter your password (Forgotten password? Please try our password recovery tool.)
DNS: 203.0.178.191 or 203.215.29.191

 

Most of the settings will be taken care of by the NBN™ Connection Box. However, it's important to configure the right WAN Type on WiFi routers to stop them trying to take over the job of the Connection Box which can cause connection issues.

Internet Service Provider (ISP): Other (Do not select "iiNet")
Mode/Modulation:
WAN
Connection Type/Mode/WAN Type:

PPPoE

Username: Enter your full username here e.g. example@iinet.net.au
example2@westnet.com.au
example3@adam.com.au
Password: Enter your password (Forgotten password? Please try our password recovery tool.)
DNS: 203.0.178.191 or 203.215.29.191

 

Note that not all modems support VDSL2. Please check the technical specifications or the manufacturer's website if you're not sure.

DSL Standard/Mode/Modulation:
VDSL2
Connection Type/Mode/WAN Type: PPPoE
VDSL Profile: 17a Multi Mode
VLAN: Enabled/on (or you may need to set the VLAN networking standard, 802.1q)
VLAN ID: 10
Username: N/A
Password: N/A
G.INP: Enabled
G.Vector: Enabled
DNS: 203.0.178.191 or 203.215.29.191

 

All iiNet Cable connections must use the modem that is supplied by us. These gateways auto-configure with all the required settings for iiNet Cable and your included Netphone service.

Connections using third party hardware are not supported, however you may choose to connect your own WiFi router to the Cable Gateway to handle your home WiFi network.